Skip to main content

Tired.

Hmm.

I think these are my plans for the weekend:

Server Configuration:

DDNS: (Dynamic Domain Naming Service)
http://www.no-ip.com/services/managed_dns/free_dynamic_dns.html
FTP: (File Transfer Protocol)
http://www.wikihow.com/Set-up-an-Ftp-Server-on-Windows-Xp-Professional
Note: Need Firewall opened on port 21 at router for that to work.
Web: (Drupal Website)
http://drupal.org/requirements

New PC Stats, as a B-Day Present. Know it ain't much, but it works. Compaq Evo :)
Specs
Drivers 

Note. Will be posting a guide with Screenshots on how to setup an FTP Server on a Windows XP (Or Vista) haven't decided yet, Machine. (May be easier on Server 03.) Then from there, configuring and using DDNS, and setting up a website with Drupal.

So long children!...

Labels:

Comments

Post a Comment

Popular posts from this blog

How to setup a Host-Check for Fortigate SSL VPN

This document outlines how to setup a host-check for a Fortigate SSL VPN (Web only): config vpn ssl web portal edit "portalname" set web-mode enable set host-check custom set host-check-policy "Microsoft-Windows-Firewall" set os-check-enable set ip-pools "PoolName" set split-tunneling disable set page-layout double-column set theme orange config os-check-list "windows-7" set action check-up-to-date set latest-patch-level 1 end  config vpn ssl web host-check-software edit "Microsoft-Windows-Firewall" config check-item-list edit 1 set target "HKLM\\SYSTEM\\CurrentControlSet\\Services\\SharedAccess\\Parameters\\FirewallPolicy\\StandardProfile:EnableFirewall==1" set type registry next edit 2 set target "HKLM\\SYSTEM\\CurrentControlSet\\Services\\SharedAccess\\Parameters\\FirewallPolicy\\PublicProfile:EnableFirewall==1" set type registry next edit 3 set target "HKLM\\SYSTEM\\CurrentControlSet\\S...
3 comments
Read more

Implementing 802.1X - Windows 2012R2 + Cisco 4500 Switches

Implementing 802.1X Using Windows Server 2012R2 & Cisco 4500 Series Switches Overview: This document is to outline how the configuration between Windows Server 2012 R2’s NPS Services and Cisco 4500 Series switches has been implemented. High Level Diagram:   Requirements: Windows Server 2012 R2 with NPS Server installed Windows Server 2012 R2 with CA Services Windows AD Environment Cisco 4500 Series Switches Windows 7-10 Clients to connect NPS Configuration: 1. This assumes the above requirement that the NPS Service has already been installed on Windows Server 2012 R2 2. Disable all existing Policies under Connection Request Policies and Network Policies as you will be making your own, except one that states “Catch All” with the below parameters: 3. You will then need to add in a new Radius Client to have Policies built around. Friendly Name will be used going forward for the Policies for referencing the document. 4. Once completed...
Post a Comment
Read more

OVA/OVF Templates and Older Versions of VMware ESXI

Recently ran into this issue which I feel is something that I should document, as it provides some additional details onto how to configure or modify an existing .ova or .ovf file which is the standard deployment template for ESXI/VMware. Here was the issue: - ESXI 5.5 - OVA required hardware type 8. Gave an error of  " Unsupported hardware version - vmx-8" when testing. Based on everything I was reading, it isn't supported. So using the ovftool which can be found on VMware's Website ( here ) you can basically extract out the ova/ovf file into a directory, and then use it to modify the VMX file and then put it all back together. Steps: 1. Download the application and install it. 2. Go to the directory where the ovftool is stored via cmd line (Typically C:\Programs Files\Vmware\ect..) 3. Issue the following command: ovftool 4. Then modify the .vmx file so that it contains now the hardware ID of 7 (or whatever you need set for your release). 5. Then issu...
1 comment
Read more